Sold out

ANT Smart BMS 13 to 24S 300A Discharge 50A Charge Balance 200mA

R 3,350.00

In StockIn StockOut of stock
Tax included.

Ant 13S to 24S ANT APP for Android Zip File - APK file BMS battery pack protection board function description:   Support: 10S -24S li-ion battery (30V-102V Lithium battery cell) 13S...

Notify me when this product is available:

SKU: BMS1004N/ACategories: Batteries, Battery ManagementTags: Battery Management

Ant 13S to 24S

ANT APP for Android Zip File - APK file

BMS battery pack protection board function description:



10S -24S li-ion battery (30V-102V Lithium battery cell)

13S -24S lifePo4 battery (30V-88V Lithium iron phosphate battery cell)

15S -24S LTO battery (30V-68V Lithium titanate battery cell)

The default is the li-ion parameters. when you phone connect Bluetooth, can click and set up lifePo4 / LTO parameters. default setting is 24S, if you use for other number of cells, change it in app.

Single cell voltage detection range 1V-4.6V. High precision detection cell voltage error is less than 5MA

Charging current 50A

Discharge current: 70A 100A 150A 200A 300A to choose

Balance current: 200mA. Controlled balance mode, when the charging is started, the voltage difference can be detected by the detected voltage difference to be greater than the set value.

High-precision coulomb counter function temperature control detection Hall speed measurement

Bluetooth connection: support for android/iPhone IOS phone

Support cells: Support Li-ion, Lipo, 18650, Lifepo4, LTO and so on

Voltage accuracy: Single cell voltage detection range (1.5-4.6V), so support a variety of cell use, accuracy error within 3 mV

Drop wire protection: detect wire not weld well and cause the voltage is wrong. Balance wire drop cell protection

Overcharge protection: Connect to Bluetooth to set high-precision detection voltage, single overcharge protection and total voltage overvoltage protection

Over discharge protection: Connect Bluetooth to set up high-precision detection voltage, single-cell over-discharge protection and total voltage under-voltage protection

Short circuit protection: Can be connected to Bluetooth to set the short circuit protection value, change to 0 is turn off short circuit protection

Overcurrent protection: can be connected to Bluetooth to set up the overcurrent protection value (maximum 300A)

Current detection: within the current range of the purchased protection board

Temperature control protection: The protection board has built-in balanced temperature control, power temperature, and can be connected with 4 temperature controls to prevent high temperature danger.

balance current: 200 mA, high voltage versus low voltage discharge balance

Discharge current: refer to the current in the purchase selection as the peak discharge current

Charging current: less than 50A

Coulomb counter: compensation 1-24S battery connection between the chip resistance is too long, causing the wire resistance to be too large, the cell voltage is too large during the charging and discharging, cannot be used normally

Connection internal resistance: based on current to time scoring, accurately calculate the remaining battery capacity and charging current

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page